Roof repair in Los Angeles,
fixed where it actually failed.
Leaks, lifted shingles, cracked tile, failed flashing, skylight and chimney curbs — found with a drone, fixed at the source, and photographed so you can see the repair.
CSLB Lic. #1137536 (C-39) · Licensed · Bonded · Insured · 5.0★ on Google, 72 reviews
A roofer you can actually reach.
Everything here is something you can check in five minutes — on Google, on the CSLB site, or by calling the number above.
- Our office is at 4464 Vista Del Monte Ave, #202 in Sherman Oaks — and we work across Los Angeles County and Orange County.
- You talk to Sam, the owner — not a call center. We still answer our own phone.
- Every roof is documented by drone, before and after. The full set is yours to keep.
- Written, itemized pricing — materials, scope, and timeline in writing, never a verbal number.
- A 10-year workmanship warranty, in writing, on every job.
The failures we find most on LA roofs.
Leaks and water stains
Water rarely shows up where it gets in. We trace it from the stain back to the flashing, valley, or penetration that failed, and fix that — not the symptom.
How we find the sourceShingle repair
Lifted, cracked, wind-damaged, or missing shingles replaced and matched to the existing roof, with the underlayment checked at the failure point.
Shingle and wind repairsTile repair
Broken-tile replacement, re-bedding at ridges and hips, and underlayment repair where the tile was doing its job but the paper underneath had failed.
Tile roofsFlashing rebuilds
Chimney, skylight, vent, and wall flashing rebuilt and counter-flashed properly — the most common leak source we see on otherwise sound roofs.
FlashingFlat-roof repair
Open seams, ponding areas, and failed patches on torch-down and TPO roofs; silicone coating where the membrane is sound.
Flat and low-slopeGutters and drainage
Clogged or separated gutters, downspouts, and roof drains fixed so water leaves the roof the way it should.
Maintenance & inspection
You get the honest answer in writing.
A free, roughly two-hour on-site inspection comes first: we walk the roof, fly the drone, and show you the photos. If a repair will genuinely fix it, that's what we quote — written, itemized, no pressure toward a replacement. If the roof is at the end of its life, we tell you that too, with the pictures to back it up.
Every repair is photographed before and after, so you can see what failed and what we did about it. The work carries our 10-year workmanship warranty in writing.
See more before-and-after drone photosRoof repair questions we get every week.
Can you find where a roof leak is actually coming from?
Yes — that is most of the job. Water travels along underlayment, rafters, and pipes before it shows up inside, so the stain is rarely under the failure. We inspect from the roof and by drone, trace the water path, and fix the flashing, valley, or penetration that let it in. The photos of the source are in your report.
Will you push me to replace the roof instead of repairing it?
No. You get a written repair-vs-replace answer with the drone photos it is based on. If a repair fixes the problem, that is what we quote. Replacement is only recommended when the roof genuinely is not worth repairing, and we show you why.
Do you repair tile roofs and flat roofs?
Yes. Tile: broken-tile replacement, ridge and hip re-bedding, and underlayment repair. Flat and low-slope: seam and ponding repairs on torch-down and TPO, and silicone restoration coatings where the membrane is sound. We are certified installers for the tile and flat-roof systems we work with.
Is there a warranty on a repair?
Yes. A 10-year workmanship warranty in writing on every job, repairs included. Manufacturer warranties on materials apply on top of that.
California Title 24: what the cool-roof rule means for your project
California's Title 24, Part 6 energy code applies by climate zone and roof slope, and it is triggered when you replace 50% or more of a roof (or about 1,000 sq ft). On flat and low-slope roofs, a CRRC-rated cool-roof product (aged solar reflectance ≥ 0.63, thermal emittance ≥ 0.75 — roughly SRI 75) is required in nearly every Southern California zone. On steep-slope (pitched) residential roofs, most of the LA basin, coast, and San Fernando Valley (Climate Zones 6, 8 and 9) is exempt — standard shingle or tile complies — while hot inland and desert zones (10–15, e.g. Santa Clarita, Lancaster, Palmdale) require a cool-roof product on every slope (about SRI 16). Cool-roof products come in many colors, not just white. Small like-for-like repairs generally don't trigger the rule, and trade-offs like added attic insulation can substitute in some cases.
Every city page on this site states the verified climate zone and fire-zone rules for that area. Codes are parcel-specific — confirm with your building department, or call us at (866) 685-3889 and we'll confirm it for you.
License, bonding and insurance
Verify our license any time on the CSLB site: CSLB #1137536, C-39 Roofing Contractor. Licensed, bonded and insured; Google Guaranteed through Local Services.
You'll deal with Sam.
Nearly a decade of hands-on roofing experience, a C-39 license, and an office in Sherman Oaks. Sam walks the roof, flies the drone, writes the itemized price, and answers the phone afterward. His answers to the five questions homeowners ask before hiring a roofer are on our homepage.
Book your free roof inspection.
We come out, walk the roof, take drone photos, and send you a written assessment within 48 hours. No pressure, no theater.
CSLB Lic. #1137536 · C-39 Roofing · Bonded · Insured
Financing available for qualified homeowners
You don't have to pay for a roof all at once: financing is available for qualified homeowners, subject to qualification — written itemized pricing first, financing second, never any pressure. If we are installing qualifying cool-roof products, PACE-style energy financing may be an option for your property; we confirm eligibility before you decide. How roof financing works in Los Angeles →