
Shingle roof repair, layover, and replacement in Los Angeles.
Everything I know about shingle roofs in one place: the first signs a roof is done, when a layover works and when the code says no, what's missing from the cheap quote, what gets skipped, and what your city requires for a cool roof.
CSLB Lic. #1137536 (C-39) · Licensed · Bonded · Insured · 5.0★ on Google, 67 reviews
A roofer you can actually reach.
Everything here you can check in five minutes: on Google, on the CSLB site, or by calling the number above.
- Our office is at 4464 Vista Del Monte Ave, #202 in Sherman Oaks. We work across Los Angeles County and Orange County.
- You talk to Sam, the owner, not a call center. He answers his own phone.
- Every roof is documented by drone, before and after. The full set is yours to keep.
- Written, itemized pricing: materials, scope, and timeline. Never a number over the phone.
- A 10-year workmanship warranty, in writing, on every job.
How to tell a shingle roof is done.
The ridge usually goes first. Ridge caps take the most sun and wind, and they wear down a piece at a time.
Then the shingles stop staying sealed. Each shingle has an adhesive strip that bonds it to the one below. When that strip stops holding, shingles lift and slide. Wind flips them up, and wind-driven rain gets under them to the nails. That's how leaks start.
Granule loss is the other one. The shingles go shiny, granules collect in the gutters, and you see bare black spots where the granules are gone. That's a shingle near the end.
One thing to separate: black streaks running down a roof are usually algae. That's cosmetic, not a sign the roof is failing. Bare spots where the granules washed off are the real warning.
When a new roof can go over the old one, and when it can't.
A layover, new shingles over the old ones, can save you money when the roof qualifies. Two things decide it: there's only one layer of shingles on the roof now, and the wood underneath is in good condition, with no wood damage expected.
A leak doesn't automatically rule it out. A minor leak where we're not expecting wood damage can still be a good fit, as long as the decking is sound. A roof with no leak history is the cleanest case.
When I say no: there are already two or more layers. The California Residential Code (Section R908.4) doesn't allow a new roof over two or more existing layers; it has to come off to the deck. And the code is right. More layers mean more weight on framing older homes weren't built to carry, standard roofing nails that often don't reach far enough into the wood to hold in wind, heat trapped between layers that bakes the new shingles, and wood you can't see under all of it.
I also say no when the leak is serious enough that we expect wood damage, and when the leak is at a transition, like flat roof to shingle. Covering it over doesn't fix it. When wood damage is likely, I recommend tearing off, so we can see how much there is, how long it's been there, and repair it properly before the new roof goes on.
No cricket? That's not a dealbreaker. The code wants a cricket on the uphill side of any chimney or penetration more than 30 inches wide (Section R903.2.2). If yours needs one and doesn't have it, we build it as part of the layover: framed, sheathed, covered with sheet metal or the same shingles, then flashed properly.
One more thing to know before you choose: Owens Corning's 50-year Preferred Protection warranty requires a tear-off to a clean deck. A layover doesn't qualify for it.
Cool roof shingles: what your city requires.
Most homeowners want a cool roof, and I recommend it on every job. The price difference is usually small, and you get a cooler attic and lower cooling bills for the life of the roof.
Whether it's required depends on where you live. Either way, I'll tell you what your city requires, and I'll still recommend going cool where it's optional.
- City of Los Angeles. Required. Replacing more than half of a pitched roof means a rated cool roof product: SRI 20 or more, or aged solar reflectance 0.25 with thermal emittance 0.85. That's the LA Green Building Code, enforced by LADBS. LADBS fact sheet
- Unincorporated LA County. Required on the same numbers, SRI 20 on pitched roofs, when more than half the roof is replaced (County Code Title 31, Section 4.106.6). County ordinance
- Everywhere else. The state energy code is the floor. Replacing half or more of a pitched roof in Climate Zones 4 and 8 through 15 needs aged solar reflectance 0.20 or SRI 16, layovers included, with a few exceptions such as R-38 attic insulation or a qualifying radiant barrier. Most of the Valley and the inland basin is Zone 8 or 9. The coastal Zone 6 cities aren't covered by the state rule for pitched roofs. Some cities add their own rule, so we check yours. Title 24 reroof rule
- Flat roofs. Cool roof rules apply in far more places than for shingle roofs: the state low-slope rule covers Climate Zones 4 and 6 through 15. Title 24 reroof rule
What's usually missing from the cheapest shingle quote.
Usually the cuts are in materials and in protection. Felt instead of synthetic underlayment. Lower-grade shingles. No license, no insurance, no bond, no workers' comp: if someone gets hurt or something goes wrong, it lands on you.
Then the surprises. A very low quote often turns into extra charges once the roof is open. And if the contractor isn't licensed, there's not much you can do if they walk off the job.
What I tell people: don't just take the cheapest number. Check the license, check the insurance, and compare what's actually included. Bring me the other quote and I'll go through it with you, free. If it's a good quote and I can't beat it, I'll tell you to go with them. We're competitive and we stand behind our work.
What I see skipped most on other people's work.
Ventilation. I see a lot of roofs without proper ventilation, and it's required by code. An attic with no ventilation gets extremely hot and holds moisture. That shortens the life of the shingles, raises cooling bills, and can void the shingle warranty: Owens Corning, for one, excludes damage from inadequate ventilation.
Underlayment. Felt instead of a quality synthetic underlayment, to save money.
Starter strip. Homeowners don't see it, so it gets skipped, but it matters. It seals the first row of shingles along the eave from both sides, to the starter and to the shingle above. It ties the shingles, the edge metal, and the underlayment together. The bottom row takes the most water on the whole roof, since everything runs down to it. And manufacturers require it for their wind warranties: Owens Corning's higher wind ratings need its starter shingles at the eaves and rakes. It's double protection right where the roof needs it most.

What goes down before the shingles do.
Synthetic underlayment, not felt. Starter along the eave. Edge metal tied into both. Every stage is photographed by drone, so you see the deck and what's on it before the shingles cover it.
See more before-and-after drone photosWhat's covered, and what's in writing before we start.
A 10-year workmanship warranty from me, in writing. That's the labor: if something fails because of how we put it on, I come back and fix it. The manufacturer's warranty on the materials runs 10 to 50 years depending on what goes on your roof.
As an Owens Corning Preferred Contractor I can extend shingle coverage up to 50 years with their Preferred Protection warranty. It requires a tear-off to a clean deck and the full Owens Corning system, and I register it with Owens Corning after the job. On Duration shingles for a single-family home that's 50 years of their TRU PROtection coverage; Oakridge is 40. The system means Owens Corning shingles, synthetic underlayment, and hip and ridge, plus two of these three: ice and water barrier, starter shingles, VentSure ventilation. Owens Corning warranty terms
The agreement already covers up to 10% wood replacement, with the per-sheet price written in for anything over. California caps the deposit at $1,000 or 10% of the contract, whichever is less, and you get three business days to cancel. The rest is a payment schedule tied to the stages of your job.
Certified installer for GAF, CertainTeed, and Malarkey; Owens Corning Preferred Contractor; Polyglass certified installer; certified installer for Boral tile (now Westlake Royal) and Eagle tile.
Owens Corning Preferred Contractor, ID 252766. See our listing
Shingle questions we get every week.
How do I know my shingle roof is done?
Look at the ridge first. Ridge caps take the most sun and wind and wear down a piece at a time. Then look for shingles that lift or slide because the adhesive strip stopped holding, and for shiny shingles, granules in the gutters, and bare black spots. That's a shingle near the end.
Are the black streaks on my roof a problem?
Usually not. Black streaks running down a roof are usually algae. That's cosmetic, not a sign the roof is failing. Bare spots where the granules washed off are the real warning.
Can you put the new roof over my old one?
Sometimes, and it can save you money. It has to be one layer of shingles now, with sound wood underneath and no wood damage expected. A minor leak doesn't rule it out. A serious leak, a leak at a transition like flat roof to shingle, or two layers already on the roof does. Owens Corning's 50-year Preferred Protection warranty requires a tear-off to a clean deck, so a layover doesn't qualify for it.
My roof already has two layers. Can you add a third?
No. The California Residential Code (Section R908.4) doesn't allow a new roof over two or more existing layers. It has to come off to the deck. And the code is right: more weight on the framing, nails that often don't reach far enough into the wood to hold in wind, heat trapped between layers, and wood you can't see.
Why is one quote so much cheaper than the others?
Usually the cuts are in materials and protection: felt instead of synthetic underlayment, lower-grade shingles, no license, insurance, bond, or workers' comp. A very low quote often turns into extra charges once the roof is open. Bring me the other quote and I'll go through it with you, free. If it's a good quote and I can't beat it, I'll tell you to go with them.
Does attic ventilation really matter?
Yes. It's required by code, and I see a lot of roofs without it. An attic with no ventilation gets extremely hot and holds moisture. That shortens the life of the shingles, raises cooling bills, and can void the shingle warranty. Owens Corning excludes damage from inadequate ventilation.
What's a starter strip, and why does it matter?
It's the strip along the eave under the first row of shingles. It seals that first row from both sides and ties the shingles, the edge metal, and the underlayment together. The bottom row takes the most water on the roof. Owens Corning's higher wind ratings require its starter shingles at the eaves and rakes.
My chimney doesn't have a cricket. Can I still get a layover?
Yes, it's not a dealbreaker. The code wants a cricket on the uphill side of any chimney or penetration more than 30 inches wide (California Residential Code R903.2.2). If yours needs one and doesn't have it, we build it as part of the layover: framed, sheathed, covered with sheet metal or the same shingles, and flashed properly.

You'll deal with Sam.
Nearly a decade of hands-on roofing experience, a C-39 license, and an office in Sherman Oaks. Sam walks the roof, flies the drone, writes the itemized price, and answers the phone afterward. More of his answers are on Ask Sam the Roofer.
Book your free shingle roof inspection.
We come out, walk the roof, fly the drone, and send you a written assessment: repair, layover, or tear-off, and why. No pressure, and no surprises.
CSLB Lic. #1137536 · C-39 Roofing · Bonded · Insured
Financing available for qualified homeowners
You don't have to pay for a roof all at once. Financing is available for qualified homeowners, subject to qualification. Written itemized pricing first, financing second. If your re-roof needs a Title 24 cool-roof product, it may also qualify for PACE-style energy financing. Ask us and we'll confirm what applies to your property. How roof financing works in Los Angeles
