Studio City roofing,
done the careful way.
Studio City puts a flat post-and-beam roof next to a steep hillside house on the same street. Two different jobs, planned two different ways.
CSLB Lic. #1137536 (C-39) · Licensed · Bonded · Insured · 5.0★ on Google, 72 reviews
A roofer you can actually reach.
Everything here you can check in five minutes: on Google, on the CSLB site, or by calling the number above.
- Our office is at 4464 Vista Del Monte Ave, #202 in Sherman Oaks. We work across Greater Los Angeles, Studio City included.
- You talk to Sam, the owner, not a call center. He answers his own phone.
- Every roof is documented by drone, before and after. The full set is yours to keep.
- Written, itemized pricing: materials, scope, and timeline. Never a number over the phone.
- A 10-year workmanship warranty, in writing, on every job.
Roof repair, replacement, and inspection in Studio City.
Roof repair
Leaks, lifted shingles, cracked tile, failed flashing, skylight curbs. Fixed where the roof actually failed, with photos of the repair.
Roof repair in Studio CityRoof replacement
Full tear-off to the deck, new underlayment, then shingle, tile, or a flat system. The deck-repair rates are written into the agreement before we start.
Roof replacement in Studio CityRoof inspection
We fly the drone, walk the roof, and tell you in writing whether it needs a repair or a replacement. No pressure either way.
Roof inspection in Studio CityWhat Studio City roofs are up against.
Marine air in the mornings, sharp heat on summer afternoons. Heavy tree canopy across Colfax Meadows and Carpenter.
What we get called for most in Studio City: ponding on undersized post-and-beam decks. Sycamore and oak debris fouling the scuppers and internal drains. Skylight curbs leaking above mid-century vaulted ceilings.
What's on the roofs here: low-slope mid-century with TPO, PVC, or modified bitumen. Two-story traditionals with architectural shingle. Hillside moderns with standing-seam metal.
Every stage gets photographed by drone, so you see the deck before it's covered. That's how we work on every roof.
See more before-and-after drone photosTitle 24, fire zones, and old decking: what applies to your house.
We check what applies to your parcel before we quote, and we confirm it with the permitting authority for you.
Energy / cool roof (Title 24)
Studio City sits in California Energy Commission Climate Zone 9. Under Title 24, Part 6, a low-slope or flat roof here must use a cool-roof product (aged solar reflectance of at least 0.63 and thermal emittance of at least 0.75, roughly SRI 75) when you replace 50% or more of the roof or about 1,000 sq ft or more. Steep-slope (pitched) residential roofs in Climate Zone 9 are exempt from the cool-roof requirement, so standard shingle or tile is fine. Small like-for-like repairs generally don't trigger it. See the California Energy Commission standards and the CRRC directory for rated products.
Fire — hillside parcels
Studio City's hillside parcels south of Ventura Blvd in the Santa Monica Mountains are in a Very High Fire Hazard Severity Zone, where the City of LA building code (Chapter 7A) requires a Class A roof assembly, ember-resistant vents, and non-combustible flashing (no wood shake). Valley-floor parcels generally aren't. You can check any parcel on the CAL FIRE hazard-zone viewer.
Decking / sheathing
Many older Studio City homes were built with spaced 1×6 “skip” sheathing under the original roof. For a modern shingle or tile system, or a Class A assembly, that decking often has to be overlaid with solid sheathing, and any rotted boards replaced. We confirm exactly what your roof needs with a deck inspection at tear-off.
Color & materials
Roof color isn't regulated by code. Where a cool roof is required you need a CRRC-rated product that meets the SRI, and those come in a wide range of colors, not just white.
Full code notes for Studio City: Title 24, fire, decking, color
Energy / cool roof (Title 24)
Studio City sits in California Energy Commission Climate Zone 9. Under Title 24, Part 6, a low-slope or flat roof here must use a cool-roof product (aged solar reflectance of at least 0.63 and thermal emittance of at least 0.75, roughly SRI 75) when you replace 50% or more of the roof or about 1,000 sq ft or more. Steep-slope (pitched) residential roofs in Climate Zone 9 are exempt from the cool-roof requirement, so standard shingle or tile is fine. Small like-for-like repairs generally don't trigger it. See the California Energy Commission standards and the CRRC directory for rated products.
Fire — hillside parcels
Studio City's hillside parcels south of Ventura Blvd in the Santa Monica Mountains are in a Very High Fire Hazard Severity Zone, where the City of LA building code (Chapter 7A) requires a Class A roof assembly, ember-resistant vents, and non-combustible flashing (no wood shake). Valley-floor parcels generally aren't. You can check any parcel on the CAL FIRE hazard-zone viewer.
Decking / sheathing
Many older Studio City homes were built with spaced 1×6 “skip” sheathing under the original roof. For a modern shingle or tile system, or a Class A assembly, that decking often has to be overlaid with solid sheathing, and any rotted boards replaced. We confirm exactly what your roof needs with a deck inspection at tear-off.
Color & materials
Roof color isn't regulated by code. Where a cool roof is required you need a CRRC-rated product that meets the SRI, and those come in a wide range of colors, not just white.
Source: the City of Los Angeles (LADBS), the California Energy Commission, and CAL FIRE. Roofing codes change and are parcel-specific — confirm with the City of Los Angeles (LADBS) before your project, or call us at (866) 685-3889 and we'll confirm it for you.
You'll deal with Sam.
Nearly a decade of hands-on roofing experience, a C-39 license, and an office in Sherman Oaks. Sam walks the roof, flies the drone, writes the itemized price, and answers the phone afterward. His answers to the five questions homeowners ask before hiring a roofer are on our homepage.
Book your free inspection in Studio City.
We come out, walk the roof, take drone photos, and send you a written assessment within 48 hours. No pressure, and no surprises.
CSLB Lic. #1137536 · C-39 Roofing · Bonded · Insured
Financing available for qualified Studio City homeowners
You don't have to pay for a roof all at once. Financing is available for qualified homeowners, subject to qualification. Written itemized pricing first, financing second. If your re-roof needs a Title 24 cool-roof product, it may also qualify for PACE-style energy financing. Ask us and we'll confirm what applies to your property. How roof financing works in Los Angeles
We're also the roofer next door in
Studio City is part of our San Fernando Valley roofing service area, which lists every city we cover there.