
Shingle roof repair, layover, and replacement in Studio City.
Median home in Studio City was built in 1972. At that age we look hard at how many layers are already up there and whether the attic can breathe. And because it's the City of Los Angeles, a new roof over more than half the house has to be a rated cool roof.
CSLB Lic. #1137536 (C-39) · Licensed · Bonded · Insured · 5.0★ on Google, 67 reviews
What's true about Studio City roofs before we ever get on one.
Public records and code, not sales copy. Each line links to where it comes from.
What we see on the roofs here: low-slope mid-century with TPO, PVC, or modified bitumen. Two-story traditionals with architectural shingle. Hillside moderns with standing-seam metal. That's from our own work in the area, not a statistic.
- Cool roof. Required. The City of Los Angeles requires a rated cool roof product with an SRI of 20 or more (or aged solar reflectance 0.25 and thermal emittance 0.85) when more than half of a pitched roof is replaced. Repairs and replacing half the roof or less are exempt. I'd recommend going cool anyway; the price difference is usually small. LADBS cool roof fact sheet
- Housing. Median year built for housing in ZIP 91604 is 1972. About 63% of it went up before 1980, and 31% before 1960. Single-family homes are 44% of the units. U.S. Census, ACS 2024 5-year
- Permits. City of Los Angeles, Department of Building and Safety (LADBS). We pull the permit and pass the fee through at cost. LADBS
- Fire zone. Studio City's hillside parcels south of Ventura Blvd in the Santa Monica Mountains are in a Very High Fire Hazard Severity Zone, where the City of LA building code (Chapter 7A) requires a Class A roof assembly, ember-resistant vents, and non-combustible flashing (no wood shake). Valley-floor parcels generally aren't. You can check any parcel on the CAL FIRE hazard-zone viewer. CAL FIRE map
- Climate. California Energy Commission Climate Zone 9. The state energy code's reroof rule (SRI 16) applies here too; the city's SRI 20 is the stricter one. Title 24 reroof rule
How to tell a shingle roof is done.
The ridge usually goes first. Ridge caps take the most sun and wind, and they wear down a piece at a time.
Then the shingles stop staying sealed. Each shingle has an adhesive strip that bonds it to the one below. When that strip stops holding, shingles lift and slide. Wind flips them up, and wind-driven rain gets under them to the nails. That's how leaks start.
Granule loss is the other one. The shingles go shiny, granules collect in the gutters, and you see bare black spots where the granules are gone. That's a shingle near the end.
One thing to separate: black streaks running down a roof are usually algae. That's cosmetic, not a sign the roof is failing. Bare spots where the granules washed off are the real warning.

What goes down before the shingles do.
Synthetic underlayment, not felt. Starter along the eave. Edge metal tied into both. Every stage is photographed by drone, so you see the deck and what's on it before the shingles cover it.
See more before-and-after drone photosWhat's covered, and what's in writing before we start.
A 10-year workmanship warranty from me, in writing. That's the labor: if something fails because of how we put it on, I come back and fix it. The manufacturer's warranty on the materials runs 10 to 50 years depending on what goes on your roof.
As an Owens Corning Preferred Contractor I can extend shingle coverage up to 50 years with their Preferred Protection warranty. It requires a tear-off to a clean deck and the full Owens Corning system, and I register it with Owens Corning after the job. Owens Corning warranty terms
The agreement already covers up to 10% wood replacement, with the per-sheet price written in for anything over. California caps the deposit at $1,000 or 10% of the contract, whichever is less, and you get three business days to cancel. The rest is a payment schedule tied to the stages of your job.
Owens Corning Preferred Contractor, ID 252766. See our listing
Two shingle questions we hear in Studio City.
My chimney doesn't have a cricket. Can I still get a layover?
Yes, it's not a dealbreaker. The code wants a cricket on the uphill side of any chimney or penetration more than 30 inches wide (California Residential Code R903.2.2). If yours needs one and doesn't have it, we build it as part of the layover: framed, sheathed, covered with sheet metal or the same shingles, and flashed properly.
Why is one quote so much cheaper than the others?
Usually the cuts are in materials and protection: felt instead of synthetic underlayment, lower-grade shingles, no license, insurance, bond, or workers' comp. A very low quote often turns into extra charges once the roof is open. Bring me the other quote and I'll go through it with you, free. If it's a good quote and I can't beat it, I'll tell you to go with them.

You'll deal with Sam.
Nearly a decade of hands-on roofing experience, a C-39 license, and an office in Sherman Oaks. Sam walks the roof, flies the drone, writes the itemized price, and answers the phone afterward. More of his answers are on Ask Sam the Roofer.
Book your free shingle roof inspection in Studio City.
We come out, walk the roof, fly the drone, and send you a written assessment: repair, layover, or tear-off, and why. No pressure, and no surprises.
CSLB Lic. #1137536 · C-39 Roofing · Bonded · Insured
Financing available for qualified homeowners
You don't have to pay for a roof all at once. Financing is available for qualified homeowners, subject to qualification. Written itemized pricing first, financing second. If your re-roof needs a Title 24 cool-roof product, it may also qualify for PACE-style energy financing. Ask us and we'll confirm what applies to your property. How roof financing works in Los Angeles
